If you’re the proud owner of an iPhone 13, you likely want to keep it protected with a reliable hard phone case. While these cases provide excellent protection, they can be a bit tricky to remove. Don’t worry, though – we’ve got you covered. In this comprehensive guide, we’ll walk you through the step-by-step process of safely removing a hard phone case from your iPhone 13. Whether you’re using your bare hands or a prying tool, we’ll provide you with the expert tips and tricks you need to make the process quick and hassle-free.
Preparing for Case Removal
Before you start removing the hard phone case from your iPhone 13, it’s important to take a few precautions to ensure the safety of your device.
Lay a Towel for Protection
To prevent any accidental damage to your phone’s screen, lay a soft towel or a pillowcase on a table before you begin. This will provide a cushioning effect in case your phone accidentally falls out of the case during the removal process.
Identify the Easiest Side to Remove First
Take a close look at your iPhone 13 and determine which side of the case will be the easiest to take off. Typically, it’s the side that doesn’t have any buttons, such as the volume buttons. Starting with the side that has the fewest buttons will make the removal process smoother.
Removing the Case by Hand
If you prefer a hands-on approach, you can remove the hard phone case from your iPhone 13 using the following steps:
Pushing the Bottom Corner Away from the Phone
Begin by pushing down and away from the phone on the bottom corner of the case. The case should be flexible enough to start coming away from the phone. If the corner is difficult to remove, you can use your thumbnail or a credit card to carefully pry it out.
Prying the Bottom Corner Off
Once the corner starts coming away from the phone, use your fingers or a credit card to pry the bottom corner of the case away from your iPhone 13. Pull the case down and outwards gently, making sure not to bend it too much to avoid damaging your phone.
Removing the Top Corner
After successfully removing the bottom corner, it’s time to remove the top corner on the same side. Pull the top corner out and downward, keeping a firm grip on your phone to prevent it from slipping out of the case.
Removing the Entire Side of the Case
With the top corner off, slide your thumb down to remove the rest of the case from your iPhone 13. If one side of the case has already fallen off, that works too! Be prepared to catch your phone as it easily slides out of the case.
Taking the Phone Out of the Case
Once the case is off, you can either tip it over to let your phone fall out or grab your phone and pull it out of the case if it’s being difficult. Now that the case is removed, it’s a good time to clean both your case and your phone’s screen.
Using a Prying Tool
If you find it challenging to remove the hard phone case by hand, you can use a prying tool to make the process easier. Follow these steps:
Finding the Seam in Your Phone Case
Some phone cases are put together with two pieces of plastic instead of one solid piece. Look for the seam on the outer edges of your phone case to identify where to start taking it apart.
Inserting the Prying Tool
Use a prying tool or a thin plastic item, such as a guitar pick, to insert the tip into the seam of your phone case. Gently wedge the tool in between the two sides of the case, ensuring it stays in the seam.
Sliding the Tool Down the Side of Your Case
Once the tool is securely wedged in the seam, slide it down the side of your case. Take your time and go slowly to avoid damaging the case. You may hear some slight popping or cracking sounds as the case separates.
Popping the Side of the Case Off
When you reach the bottom of one side, use the prying tool to gently pop the top of the case off the back. This action should separate the majority of the case from the back side, making it easy to remove.
Removing the Other Side of the Case
If the other side of your case is still attached, wedge the tip of the prying tool into the seams on that side and slide it down until the whole thing pops off. With the case off, you’re ready to either swap in a new one or decorate your phone case.
Cleaning Your Case and Phone
Now that you’ve successfully removed the hard phone case from your iPhone 13, it’s a good idea to clean both the case and your phone’s screen. Use a cloth dampened with water and hand soap to gently clean the case, removing any dirt or grime. For the screen, use a microfiber cloth to wipe away fingerprints and smudges.
FAQs
Does the case have to be removed to install a screen saver?
It depends on the type of screen saver you’re using. Some screen savers come with a frame that fits around the entire phone, requiring the removal of the case before installation. Be sure to check the instructions provided with the screen saver for specific guidelines.
In conclusion, removing a hard phone case from your iPhone 13 is a straightforward process. Whether you choose to remove it by hand or with a prying tool, following the steps outlined in this guide will ensure a safe and hassle-free experience. Remember to take your time, be gentle, and clean both your case and phone after removal. With these tips and tricks, you’ll be able to switch cases or give your phone a fresh new look in no time!
